Foshan Subole Electronic Technology Co., Ltd.
Foshan Subole Electronic Technology Co., Ltd.
Add to Cart
XL1300 Professional Power Amplifier 2 channel black in Professioanl binding post outputs
Description
Output Impedance: Class A amplifiers generally have a low output impedance, which allows them to drive low-impedance loads directly. This characteristic makes them suitable for driving speakers or other audio devices without the need for additional output impedance matching circuits.
Bias Current Adjustment: The bias current, which determines the amount of current flowing through the output devices, can be adjusted to optimize the amplifier's performance. A higher bias current increases the amplifier's output power capability but also results in increased power consumption and heat dissipation. It is important to strike a balance between bias current, output power, and heat dissipation requirements.
Quick Detail
| Model | XL-1300 | |
| TA 1KHz THD≤1% Stereo Power | 8 OHMS | 2×1300W |
| 4 OHMS | 2×1750W | |
| TA 1KHz THD≤1% Bridge Mono Power | 8 OHMS | 3500W |
Frequency Response | 10Hz-50KHz-1.5dB | |
Noise A-weighting | ＞100dB | |
Damping Coefficient | ＞200 | |
Maximum Input Level | 21dBV/9V | |
Slew Rate | ≥35V/μS | |
Channel Separation | ＞70dB | |
Input Sensitivity | 0.77V/1V/1.4V | |
Input Impedance(Equilibrium/Disequilibrium) | 20K OHMS/10K OHMS | |
Output Type | Class A | |
Power Dissipation (half-power,8 OHMS) | ＜1600W | |
Power Source | 220V-240V/50Hz | |
Cooling | Two variable speed fans | |
Protection | DC / short circuit / over voltage over current protection / soft start / power amplifier tube overheat protection / distortion limiting | |
Display | Power light (green), Protection light (red), Overload light (yellow), Signal light (green) | |
Input | Balanced input | |
Output | Professioanl binding post outputs | |
Panel Control | Left and right channel volume control, power switch control | |
Backplane Control |
Stereo / Parallel / bridge mono switch, 0.77v/1v/1.4v sensitivity switch | |
Dimension (mm) | 482×429.5×88(mm) | |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
